Heatwave Recoil 2 V2 26 Self-Righting, Brushless: RTR

• High-impact ABS molded self-righting hull and canopy
• Spektrum 2300Kv Brushless Outrunner Marine Motor with integrated weight
• 100A Spektrum Brushless ESC
• Two custom liveries by Shreddy and Heat Wave Visual
• Aluminum offset rudder and propeller strut
• Flex shaft-driven propeller
• Stainless steel hardware

• Durable aluminum propeller
• Custom-programmed Spektrum SLT3 3-channel 2.4GHz transmitter and receiver
• Pro Boat 5.3kg waterproof servo
• Flotation foam on the canopy and hull
• Battery tray with new second battery strap
• Boat stand

SMART TECHNOLOGY

The Recoil 2 V2 includes a Spektrum Smart battery and charger. Recharging the battery is as simple as plugging the charger into any USB port and connecting the battery. You won't have to worry whether your voltage and amperage are set correctly.

100 Amp Spektrum™ Brushless ESC

This lightweight ESC is designed with self-righting in mind, allowing for quick forward and reverse changes to flip the boat over after a wipeout. It's programmed to work with the SLT3 transmitter's automatic self-righting button. With a single press, your Recoil 2 V2 will flip back upright. If you'd rather self-right using manual control, you can do that, too.

Spektrum™ 2300Kv Brushless Outrunner Marine Motor with Integrated Weight

The included brushless marine motor also features an integrated weight on the outrunner, eliminating the need for a weighted coupler to provide self-righting capabilities. That's one less piece of rotating mass inside of the boat.

Two Custom Liveries by Heat Wave Visual and Shreddy

The Recoil 2 V2 features liveries created and licensed by Shreddy and Heat Wave Visual. Now you can have the custom livery to match your apparel! Go for the Black and Gold classic look, or go all-out wild with the Shreddy design inspired by Blake Wilkey.

High Impact ABS Molded Self-Righting Hull and Canopy

The ABS canopy attaches securely to the high-impact, self-righting hull using four thumb screws. An EVA foam seal around the canopy ensures that water is locked outside the hull.

Pro Boat 5.3kg Waterproof Servo

The high torque servo provides more than enough power to keep the Recoil 2 V2 pointed in the right direction. Waterproofing makes sure the servo is up to the task of being in a boat without the risking failure due to moisture.

Aluminum Offset Rudder and Propeller Strut

The aluminum rudder and propeller strut provide higher performance compared to composite or plastic. Hard anodizing ensures a long wear life.

Flex Shaft-Driven Propeller

The flex shaft allows for propeller angle adjustment, allowing the Recoil 2 V2 deep-V to run in most water conditions.

Stainless Steel Hardware

The included hardware is made of stainless steel to prevent rust. If replacements are needed, the metric screw sizes used are easy to find.

Unrivaled Turning Performance

The Recoil 2 V2 hull and hardware have been tuned precisely for turn-on-a-dime performance. Combined with the low center of gravity, this makes it one of the tightest turning boats. Don't fear the flip, because this boat loves to stay planted in the turn!

Flotation Foam on Canopy and Hull

Foam flotation is included as a safety measure to keep your Recoil 2 V2 afloat in the event of a breach. If the canopy detaches due to improper installation, it will also stay on top of the water.

Boat Stand

Constructed of sturdy composite, the included stand can be used for display or for working on your Recoil 2 V2. Foam protects the boat's finish, and it can easily be used as a parts tray when needed.